Merge pull request #4745 from stvstnfrd/circuit/clean

Remove JavaScript variables from global namespace

common/lib/xmodule/xmodule/js/src/capa/schematic.js

@@ -12,8 +12,7 @@
 // for modified nodal analysis (MNA) stamps see
 // http://www.analog-electronics.eu/analog-electronics/modified-nodal-analysis/modified-nodal-analysis.xhtml
 
-cktsim = (function() {
-    
+var cktsim = (function() {
 	///////////////////////////////////////////////////////////////////////////////
 	//
 	//  Circuit
@@ -21,37 +20,34 @@ cktsim = (function() {
 	//////////////////////////////////////////////////////////////////////////////
 
     // types of "nodes" in the linear system
-	T_VOLTAGE = 0;
-	T_CURRENT = 1;
-
-        v_newt_lim = 0.3;   // Voltage limited Newton great for Mos/diodes
-	v_abstol = 1e-6;	// Absolute voltage error tolerance
-	i_abstol = 1e-12;	// Absolute current error tolerance
-        eps = 1.0e-12;           // A very small number compared to one.
-	dc_max_iters = 1000;	// max iterations before giving pu
-	max_tran_iters = 20;	// max iterations before giving up
-	time_step_increase_factor = 2.0;  // How much can lte let timestep grow.
-	lte_step_decrease_factor = 8;    // Limit lte one-iter timestep shrink.
-	nr_step_decrease_factor = 4;     // Newton failure timestep shink.
-	reltol = 0.0001;		// Relative tol to max observed value
-        lterel = 10;             // LTE/Newton tolerance ratio (> 10!)
-        res_check_abs = Math.sqrt(i_abstol); // Loose Newton residue check
-        res_check_rel = Math.sqrt(reltol); // Loose Newton residue check
+    var T_VOLTAGE = 0;
+    var T_CURRENT = 1;
+
+    var v_newt_lim = 0.3; // Voltage limited Newton great for Mos/diodes
+    var v_abstol = 1e-6; // Absolute voltage error tolerance
+    var i_abstol = 1e-12; // Absolute current error tolerance
+    var eps = 1.0e-12; // A very small number compared to one.
+    var dc_max_iters = 1000; // max iterations before giving up
+    var max_tran_iters = 20; // max iterations before giving up
+    var time_step_increase_factor = 2.0; // How much can lte let timestep grow.
+    var lte_step_decrease_factor = 8; // Limit lte one-iter timestep shrink.
+    var nr_step_decrease_factor = 4; // Newton failure timestep shrink.
+    var reltol = 0.0001; // Relative tol to max observed value
+    var lterel = 10; // LTE/Newton tolerance ratio (> 10!)
+    var res_check_abs = Math.sqrt(i_abstol); // Loose Newton residue check
+    var res_check_rel = Math.sqrt(reltol); // Loose Newton residue check
 
 	function Circuit() {
-	    this.node_map = new Array();
+        this.node_map = [];
 	    this.ntypes = [];
-	    this.initial_conditions = [];  // ic's for each element
-
-	    this.devices = [];  // list of devices
-	    this.device_map = new Array();  // map name -> device
-	    this.voltage_sources = [];  // list of voltage sources
-	    this.current_sources = [];  // list of current sources
-
+        this.initial_conditions = [];
+        this.devices = [];
+        this.device_map = [];
+        this.voltage_sources = [];
+        this.current_sources = [];
 	    this.finalized = false;
 	    this.diddc = false;
 	    this.node_index = -1;
-
 	    this.periods = 1
 	}
 
@@ -102,7 +98,7 @@ cktsim = (function() {
 		}
 
 		// Check for voltage source loops. 
-		n_vsrc = this.voltage_sources.length;
+        var n_vsrc = this.voltage_sources.length;
 		if (n_vsrc > 0) { // At least one voltage source
 		    var GV = mat_make(n_vsrc, this.N);  // Loop check
 		    for (var i = n_vsrc - 1; i >= 0; --i) {
@@ -187,7 +183,6 @@ cktsim = (function() {
 		return false;
 	    }
 	    return true;
-	    
 	}
 
 	// if converges: updates this.solution, this.soln_max, returns iter count
@@ -196,11 +191,12 @@ cktsim = (function() {
         Circuit.prototype.find_solution = function(load,maxiters) {
 	    var soln = this.solution;
 	    var rhs = this.rhs;
-	    var d_sol = new Array();
+	    var d_sol = [];
 	    var abssum_compare;
 	    var converged,abssum_old=0, abssum_rhs;
 	    var use_limiting = false;
 	    var down_count = 0;
+        var thresh;
 
 	    // iteratively solve until values convere or iteration limit exceeded
 	    for (var iter = 0; iter < maxiters; iter++) {
@@ -221,7 +217,6 @@ cktsim = (function() {
 		    use_limiting = true;
 		}
 	        else {  // Compute the Newton delta
-		    //d_sol = mat_solve(this.matrix,rhs);
 		    d_sol = mat_solve_rq(this.matrix,rhs);
 
 		    // If norm going down for ten iters, stop limiting
@@ -267,12 +262,10 @@ cktsim = (function() {
 		    }
 		}
 
-		//alert(numeric.prettyPrint(this.solution);)
                 if (converged == true) {
 		    for (var i = this.N - 1; i >= 0; --i) 
 			if (Math.abs(soln[i]) > this.soln_max[i])
 			    this.soln_max[i] = Math.abs(soln[i]);
-		    
 		    return iter+1;
 		}
 	    }
@@ -281,7 +274,6 @@ cktsim = (function() {
 
 	// DC analysis
 	Circuit.prototype.dc = function() {
-
 	    // Allocation matrices for linear part, etc.
 	    if (this.finalize() == false)
 		return undefined;
@@ -315,7 +307,7 @@ cktsim = (function() {
 		// Note that a dc solution was computed
 		this.diddc = true;
 		// create solution dictionary
-		var result = new Array();
+        var result = [];
 		// capture node voltages
 		for (var name in this.node_map) {
 		    var index = this.node_map[name];
@@ -348,7 +340,6 @@ cktsim = (function() {
 		for (var i = ckt.N-1; i >= 0; --i) {
 		    var dqdt = ckt.alpha0*ckt.q[i] + ckt.alpha1*ckt.oldq[i] + 
 			ckt.alpha2*ckt.old2q[i];
-		    //alert(numeric.prettyPrint(dqdt));
 		    rhs[i] = ckt.beta0[i]*ckt.c[i] + ckt.beta1[i]*ckt.oldc[i] - dqdt;
 		}
 		// matrix = beta0*G + alpha0*C.
@@ -424,7 +415,7 @@ cktsim = (function() {
 	    // build array to hold list of results for each variable
 	    // last entry is for timepoints.
 	    var response = new Array(N + 1);
-	    for (var i = N; i >= 0; --i) response[i] = new Array();
+        for (var i = N; i >= 0; --i) response[i] = [];
 
 	    // Allocate back vectors for up to a second order method
 	    this.old3sol = new Array(this.N);
@@ -473,8 +464,6 @@ cktsim = (function() {
 		    period = Math.min(period, per);
 	    }
 	    this.periods = Math.ceil((tstop - tstart)/period);
-	    //alert('number of periods ' + this.periods);
-
 
 	    this.time = tstart;
 	    // ntpts adjusted by numbers of periods in input
@@ -495,7 +484,6 @@ cktsim = (function() {
 		this.oldc[i] = this.c[i]; 
 	    }
 
-	    
 	    var beta0,beta1;
 	    // Start with two pseudo-Euler steps, maximum 50000 steps/period
 	    var max_nsteps = this.periods*50000;
@@ -511,7 +499,6 @@ cktsim = (function() {
 		    this.old3q[i] = this.oldq[i];
 		    this.old2q[i] = this.oldq[i];
 		    this.oldq[i] = this.q[i];
-
 		}
 
 		if (step_index < 0) {  // Take a prestep using BE
@@ -572,7 +559,6 @@ cktsim = (function() {
 			if (step_index > 0) new_step = time_step_increase_factor*this.min_step;
 			break;
 		    } else if (iterations == undefined) {  // NR nonconvergence, shrink by factor
-			//alert('timestep nonconvergence ' + this.time + ' ' + step_index);
 			this.time = this.oldt + 
 			    (this.time - this.oldt)/nr_step_decrease_factor;
 		    } else {  // Check the LTE and shrink step if needed.
@@ -587,7 +573,7 @@ cktsim = (function() {
 	    }
 
 	    // create solution dictionary
-	    var result = new Array();
+        var result = [];
 	    for (var name in this.node_map) {
 		var index = this.node_map[name];
 		result[name] = (index == -1) ? 0 : response[index];
@@ -629,7 +615,7 @@ cktsim = (function() {
 	    // build array to hold list of magnitude and phases for each node
 	    // last entry is for frequency values
 	    var response = new Array(2*N + 1);
-	    for (var i = 2*N; i >= 0; --i) response[i] = new Array();
+        for (var i = 2*N; i >= 0; --i) response[i] = [];
 
 	    // multiplicative frequency increase between freq points
 	    var delta_f = Math.exp(Math.LN10/npts);
@@ -685,7 +671,7 @@ cktsim = (function() {
 	    }
 
 	    // create solution dictionary
-	    var result = new Array();
+        var result = [];
 	    for (var name in this.node_map) {
 		var index = this.node_map[name];
 		result[name] = (index == -1) ? 0 : response[index];
@@ -695,7 +681,6 @@ cktsim = (function() {
 	    return result;
 	}
 
-
         // Helper for adding devices to a circuit, warns on duplicate device names.
         Circuit.prototype.add_device = function(d,name) {
 	    // Add device to list of devices and to device map
@@ -738,7 +723,6 @@ cktsim = (function() {
 	    } // zero area diodes discarded.
 	}
 
-
 	Circuit.prototype.c = function(n1,n2,v,name) {
 	    // try to convert string value into numeric value, barf if we can't
 	    if ((typeof v) == 'string') {
@@ -774,6 +758,7 @@ cktsim = (function() {
 	}
 
         Circuit.prototype.opamp = function(np,nn,no,ng,A,name) {
+            var ratio;
 	    // try to convert string value into numeric value, barf if we can't
 	    if ((typeof A) == 'string') {
 		ratio = parse_number(A,undefined);
@@ -939,7 +924,7 @@ cktsim = (function() {
         // variables (rows that can be removed without changing rank(M).
         Circuit.prototype.algebraic = function(M) {
 	    var Nr = M.length
-	    Mc = mat_make(Nr, Nr);
+	    var Mc = mat_make(Nr, Nr);
 	    mat_copy(M,Mc);
 	    var R = mat_rank(Mc);
 
@@ -969,7 +954,6 @@ cktsim = (function() {
 		for (var j = 0; j < m; j++)
 		    dest[i][j] = src[i][j];
 	}
-	    
         // Copy and transpose A -> using the bounds of A
 	function mat_copy_transposed(src,dest) {
 	    var n = src.length;
@@ -989,7 +973,7 @@ cktsim = (function() {
 	    var Nc = Mo[0].length;  // Number of columns
 	    var temp,i,j;
 	    // Make a copy to avoid overwriting
-	    M = mat_make(Nr, Nc);
+        var M = mat_make(Nr, Nc);
 	    mat_copy(Mo,M);
 
 	    // Find matrix maximum entry
@@ -1034,7 +1018,6 @@ cktsim = (function() {
 		}
 	    }
 
-	    // return the rank
 	    return the_rank;
 	}
 
@@ -1043,7 +1026,7 @@ cktsim = (function() {
         // M should have the extra column!
         // Almost everything is in-lined for speed, sigh.
         function mat_solve_rq(M, rhs) {
-
+            var scale;
 	    var Nr = M.length;  // Number of rows
 	    var Nc = M[0].length;  // Number of columns
 
@@ -1076,7 +1059,7 @@ cktsim = (function() {
 		}
 
 		// Calculate row norm, save if this is first (largest)
-		row_norm = Math.sqrt(maxsumsq);
+        var row_norm = Math.sqrt(maxsumsq);
 		if (row == 0) mat_scale = row_norm;
 
 		// Check for all zero rows
@@ -1087,7 +1070,6 @@ cktsim = (function() {
 		    break;
 		}
 
-
 		// Nonzero row, eliminate from rows below
 		var Mr = M[row];
 		for (var col =  Nc-1; col >= 0; --col) // Scale rhs also
@@ -1113,7 +1095,6 @@ cktsim = (function() {
 		}
 	    }
 
-	    // Return solution.
 	    return x;
 	}
 
@@ -1169,7 +1150,6 @@ cktsim = (function() {
 		x[i] = temp/M[i][i];
 	    }
 
-	    // return solution
 	    return x;
 	}
 
@@ -1286,7 +1266,6 @@ cktsim = (function() {
 		    return result*multiplier;
 		}
 	    }
-    
 	    // read decimal integer or floating-point number
 	    while (true) {
 		if (s.charAt(index) >= '0' && s.charAt(index) <= '9')
@@ -1378,7 +1357,7 @@ cktsim = (function() {
 
 	function parse_source(v) {
 	    // generic parser: parse v as either <value> or <fun>(<value>,...)
-	    var src = new Object();
+        var src = {};
 	    src.period = 0; // Default not periodic
 	    src.value = function(t) { return 0; }  // overridden below
 	    src.inflection_point = function(t) { return undefined; };  // may be overridden below
@@ -1590,7 +1569,6 @@ cktsim = (function() {
 
         function VSource(npos,nneg,branch,v) {
 	    Device.call(this);
-	    
 	    this.src = parse_source(v);
 	    this.npos = npos;
 	    this.nneg = nneg;
@@ -1630,7 +1608,6 @@ cktsim = (function() {
 
 	function ISource(npos,nneg,v) {
 	    Device.call(this);
-
 	    this.src = parse_source(v);
 	    this.npos = npos;
 	    this.nneg = nneg;
@@ -1829,7 +1806,6 @@ cktsim = (function() {
 	}
 
 
-
 	///////////////////////////////////////////////////////////////////////////////
 	//
 	//  Simple Voltage-Controlled Voltage Source Op Amp model 
@@ -1849,7 +1825,6 @@ cktsim = (function() {
 
 	Opamp.prototype = new Device();
         Opamp.prototype.constructor = Opamp;
-        
         Opamp.prototype.load_linear = function(ckt) {
             // MNA stamp for VCVS: 1/A(v(no) - v(ng)) - (v(np)-v(nn))) = 0.
 	    var invA = 1.0/this.gain;
@@ -1872,14 +1847,12 @@ cktsim = (function() {
 	}
 
 
-
 	///////////////////////////////////////////////////////////////////////////////
 	//
 	//  Simplified MOS FET with no bulk connection and no body effect.
 	//
 	///////////////////////////////////////////////////////////////////////////////
 
-
         function Fet(d,g,s,ratio,name,type) {
 	    Device.call(this);
 	    this.d = d;
@@ -2023,16 +1996,6 @@ function add_schematic_handler(other_onload) {
 	update_schematics();
     }
 }
-/*
- * THK: Attaching update_schematic to window.onload is rather presumptuous...
- *      The function is called for EVERY page load, whether in courseware or in
- *      course info, in 6.002x or the public health course. It is also redundant
- *      because courseware includes an explicit call to update_schematic after
- *      each ajax exchange. In this case, calling update_schematic twice appears 
- *      to contribute to a bug in Firefox that does not render the schematic
- *      properly depending on timing.
- */
-//window.onload = add_schematic_handler(window.onload);
 
 // ask each schematic input widget to update its value field for submission
 function prepare_schematics() {
@@ -2042,20 +2005,18 @@ function prepare_schematics() {
 }
 
 schematic = (function() {
-	background_style = 'rgb(220,220,220)';
-	element_style = 'rgb(255,255,255)';
-	thumb_style = 'rgb(128,128,128)';
-	normal_style = 'rgb(0,0,0)';  // default drawing color
-	component_style = 'rgb(64,64,255)';  // color for unselected components
-	selected_style = 'rgb(64,255,64)';  // highlight color for selected components
-	grid_style = "rgb(128,128,128)";
-	annotation_style = 'rgb(255,64,64)';  // color for diagram annotations
-
-	property_size = 5;  // point size for Component property text
-	annotation_size = 6;  // point size for diagram annotations
-
-	// list of all the defined parts
-	parts_map = {
+    var background_style = 'rgb(220,220,220)';
+    var element_style = 'rgb(255,255,255)';
+    var thumb_style = 'rgb(128,128,128)';
+    var normal_style = 'rgb(0,0,0)';  // default drawing color
+    var component_style = 'rgb(64,64,255)';  // color for unselected components
+    var selected_style = 'rgb(64,255,64)';  // highlight color for selected components
+    var grid_style = "rgb(128,128,128)";
+    var annotation_style = 'rgb(255,64,64)';  // color for diagram annotations
+    var property_size = 5;  // point size for Component property text
+    var annotation_size = 6;  // point size for diagram annotations
+
+    var parts_map = {
 	    'g': [Ground, 'Ground connection'],
 	    'L': [Label, 'Node label'],
 	    'v': [VSource, 'Voltage source'],
@@ -2093,7 +2054,6 @@ schematic = (function() {
 	    if (this.origin_y == undefined) this.origin_y = 0;
 	    this.cursor_x = 0;
 	    this.cursor_y = 0;
-
 	    this.window_list = [];  // list of pop-up windows in increasing z order
 
 	    // use user-supplied list of parts if supplied
@@ -2101,7 +2061,7 @@ schematic = (function() {
 	    this.edits_allowed = true;
 	    var parts = input.getAttribute('parts');
 	    if (parts == undefined || parts == 'None') {
-		parts = new Array();
+            parts = [];
 		for (var p in parts_map) parts.push(p);
 	    } else if (parts == '') {
 		this.edits_allowed = false;
@@ -2138,7 +2098,7 @@ schematic = (function() {
 		this.submit_analyses = undefined;
 
 	    // toolbar
-	    this.tools = new Array();
+        this.tools = [];
 	    this.toolbar = [];
 
         /* DISABLE HELP BUTTON (target URL not consistent with multicourse hierarchy) -- SJSU
@@ -2233,13 +2193,11 @@ schematic = (function() {
 		this.status_div.style.height = status_height + 'px';
 	    } else this.status_div = undefined;
 
-	    this.connection_points = new Array();  // location string => list of cp's
+        this.connection_points = []; // location string => list of cp's
 	    this.components = [];
-
 	    this.dragging = false;
 	    this.select_rect = undefined;
 	    this.wire = undefined;
-
 	    this.operating_point = undefined;  // result from DC analysis
 	    this.dc_results = undefined;   // saved analysis results for submission
 	    this.ac_results = undefined;   // saved analysis results for submission
@@ -2339,13 +2297,12 @@ schematic = (function() {
 	    this.zoomall();
 	}
 
-	part_w = 42;   // size of a parts bin compartment
-	part_h = 42;
-	status_height = 18;
+	var part_w = 42;   // size of a parts bin compartment
+	var part_h = 42;
+	var status_height = 18;
 
 	Schematic.prototype.add_component = function(new_c) {
 	    this.components.push(new_c);
-
 	    // create undoable edit record here
 	}
 
@@ -2358,7 +2315,6 @@ schematic = (function() {
 	    return this.connection_points[cp.location];
 	}
 
-	// add connection point to list of connection points at that location
 	Schematic.prototype.add_connection_point = function(cp) {
 	    var cplist = this.connection_points[cp.location];
 	    if (cplist) cplist.push(cp);
@@ -2367,11 +2323,9 @@ schematic = (function() {
 		this.connection_points[cp.location] = cplist;
 	    }
 
-	    // return list of conincident connection points
 	    return cplist;
 	}
 
-	// remove connection point from the list points at the old location
 	Schematic.prototype.remove_connection_point = function(cp,old_location) {
 	    // remove cp from list at old location
 	    var cplist = this.connection_points[old_location];
@@ -2387,13 +2341,11 @@ schematic = (function() {
 	    }
 	}
 
-	// connection point has changed location: remove, then add
 	Schematic.prototype.update_connection_point = function(cp,old_location) {
 	    this.remove_connection_point(cp,old_location);
 	    return this.add_connection_point(cp);
 	}
 
-	// add a wire to the schematic
 	Schematic.prototype.add_wire = function(x1,y1,x2,y2) {
 	    var new_wire = new Wire(x1,y1,x2,y2);
 	    new_wire.add(this);
@@ -2464,7 +2416,6 @@ schematic = (function() {
 
 	Schematic.prototype.unselect_all = function(which) {
 	    this.operating_point = undefined;  // remove annotations
-
 	    for (var i = this.components.length - 1; i >= 0; --i)
 		if (i != which) this.components[i].set_select(false);
 	}
@@ -2489,7 +2440,6 @@ schematic = (function() {
 		if (component.selected) component.move_end();
 	    }
 	    this.dragging = false;
-
 	    this.clean_up_wires();
 	    this.redraw_background();
 	}
@@ -2509,11 +2459,6 @@ schematic = (function() {
 	    this.origin_x += cx*(this.scale - nscale);
 	    this.origin_y += cy*(this.scale - nscale);
 	    this.scale = nscale;
-
-
-	    //this.origin_x = cx - this.width/(2*this.scale);
-	    //this.origin_y = cy - this.height/(2*this.scale);
-
 	    this.redraw_background();
 	}
 
@@ -2522,15 +2467,14 @@ schematic = (function() {
 	    this.redraw_background();
 	}
 
-	zoom_factor = 1.25;    // scaling is some power of zoom_factor
-	zoom_min = 0.5;
-	zoom_max = 4.0;
-	origin_min = -200;    // in grids
-	origin_max = 200;
+	var zoom_factor = 1.25;    // scaling is some power of zoom_factor
+	var zoom_min = 0.5;
+	var zoom_max = 4.0;
+	var origin_min = -200;    // in grids
+	var origin_max = 200;
 
 	Schematic.prototype.zoomin = function() {
 	    var nscale = this.scale * zoom_factor;
-
 	    if (nscale < zoom_max) {
 		// keep center of view unchanged
 		this.origin_x += (this.width/2)*(1.0/this.scale - 1.0/nscale);
@@ -2542,7 +2486,6 @@ schematic = (function() {
 
 	Schematic.prototype.zoomout = function() {
 	    var nscale = this.scale / zoom_factor;
-
 	    if (nscale > zoom_min) {
 		// keep center of view unchanged
 		this.origin_x += (this.width/2)*(1.0/this.scale - 1.0/nscale);
@@ -2632,7 +2575,6 @@ schematic = (function() {
 		new_c.add(this);
 	    }
 
-	    // see what we've wrought
 	    this.redraw();
 	}
 
@@ -2647,7 +2589,6 @@ schematic = (function() {
 	    // use default value if no schematic info in value
 	    if (value == undefined || value.indexOf('[') == -1)
 		value = initial_value;
-	    
 	    if (value && value.indexOf('[') != -1) {
 		// convert string value into data structure
 		var json = JSON.parse(value);
@@ -2656,12 +2597,6 @@ schematic = (function() {
 		for (var i = json.length - 1; i >= 0; --i) {
 		    var c = json[i];
 		    if (c[0] == 'view') {
-			// special hack: view component lets us recreate view
-			// ignore saved view parameters as they sometimes screw students
-			//this.origin_x = c[1];
-			//this.origin_y = c[2];
-			//this.scale = c[3];
-			//this.ac_npts = c[4];
 			this.ac_fstart = c[5];
 			this.ac_fstop = c[6];
 			this.ac_source_name = c[7];
@@ -2684,20 +2619,15 @@ schematic = (function() {
 			var coords = c[1];
 			var properties = c[2];
 
-			// make the part
 			var part = new parts_map[type][0](coords[0],coords[1],coords[2]);
-
-			// give it its properties
 			for (var name in properties)
 			    part.properties[name] = properties[name];
 
-			// add component to the diagram
 			part.add(this);
 		    }
 		}
 	    }
 
-	    // see what we've got!
 	    this.redraw_background();
 	}
 
@@ -2721,7 +2651,6 @@ schematic = (function() {
 		this.components[i].label_connections();
 	}
 
-	// generate a new label
 	Schematic.prototype.get_next_label = function() {
 	    // generate next label in sequence
 	    this.next_label += 1;
@@ -2746,7 +2675,6 @@ schematic = (function() {
 	    this.input.value = JSON.stringify(this.json_with_analyses());
 	}
 
-	// produce a JSON representation of the diagram
 	Schematic.prototype.json = function() {
 	    var json = [];
 
@@ -2764,7 +2692,6 @@ schematic = (function() {
 	    return json;
 	}
 
-	// produce a JSON representation of the diagram
 	Schematic.prototype.json_with_analyses = function() {
 	    var json = this.json();
 
@@ -2847,8 +2774,7 @@ schematic = (function() {
 		return;
 	    }
 
-	    var fields = new Array();
-	    //fields[npts_lbl] = build_input('text',10,this.ac_npts);
+        var fields = [];
 	    fields[fstart_lbl] = build_input('text',10,this.ac_fstart);
 	    fields[fstop_lbl] = build_input('text',10,this.ac_fstop);
 	    fields[source_name_lbl] = build_input('text',10,this.ac_source_name);
@@ -2861,7 +2787,6 @@ schematic = (function() {
 		    var sch = content.sch;
 
 		    // retrieve parameters, remember for next time
-		    //sch.ac_npts = content.fields[npts_lbl].value;
 		    sch.ac_fstart = content.fields[fstart_lbl].value;
 		    sch.ac_fstop = content.fields[fstop_lbl].value;
 		    sch.ac_source_name = content.fields[source_name_lbl].value;
@@ -2873,9 +2798,7 @@ schematic = (function() {
 		});
 	}
 
-	// perform ac analysis
 	Schematic.prototype.ac_analysis = function(npts,fstart,fstop,ac_source_name) {
-	    // run the analysis
 	    var ckt = this.extract_circuit();
 	    if (ckt === null) return;
 	    var results = ckt.ac(npts,fstart,fstop,ac_source_name);
@@ -2889,7 +2812,6 @@ schematic = (function() {
 		for (var i = x_values.length - 1; i >= 0; --i)
 		    x_values[i] = Math.log(x_values[i])/Math.LN10;
 
-
 		if (this.submit_analyses != undefined) {
 		    var submit = this.submit_analyses['ac'];
 		    if (submit != undefined) {
@@ -2919,7 +2841,6 @@ schematic = (function() {
 		var y_values = [];  // list of [color, result_array]
 		var z_values = [];  // list of [color, result_array]
 		var probes = this.find_probes();
-
 		var probe_maxv = [];
 		var probe_color = [];
 
@@ -2931,8 +2852,8 @@ schematic = (function() {
 		    var v = results[label];
 		    probe_maxv[i] = array_max(v); // magnitudes always > 0
 		}
-		var all_max = array_max(probe_maxv);
 
+        var all_max = array_max(probe_maxv);
 		if (all_max < 1.0e-16) {
 		    alert('Zero ac response, -infinity on DB scale.');
 		} else {
@@ -2950,7 +2871,6 @@ schematic = (function() {
 		    var color = probes[i][0];
 		    var label = probes[i][1];
 		    var offset = cktsim.parse_number(probes[i][2]);
-
 		    var v = results[label];
 		    // convert values into dB relative to source amplitude
 		    var v_max = 1;
@@ -2977,15 +2897,13 @@ schematic = (function() {
 
 	    var npts_lbl = 'Minimum number of timepoints';
 	    var tstop_lbl = 'Stop Time (seconds)';
-    
 	    var probes = this.find_probes();
 	    if (probes.length == 0) {
 		alert("Transient Analysis: there are no probes in the diagram!");
 		return;
 	    }
 
-	    var fields = new Array();
-	    //fields[npts_lbl] = build_input('text',10,this.tran_npts);
+        var fields = [];
 	    fields[tstop_lbl] = build_input('text',10,this.tran_tstop);
 
 	    var content = build_table(fields);
@@ -2998,7 +2916,6 @@ schematic = (function() {
 		    if (ckt === null) return;
 
 		    // retrieve parameters, remember for next time
-		    //sch.tran_npts = content.fields[npts_lbl].value;
 		    sch.tran_tstop = content.fields[tstop_lbl].value;
 
 		    // gather a list of nodes that are being probed.  These
@@ -3109,7 +3026,6 @@ schematic = (function() {
 		}
 	    }
 
-	    // update diagram
 	    this.redraw_background();
 	}
 
@@ -3161,7 +3077,6 @@ schematic = (function() {
 		}
 	    }
 	    this.unsel_bbox = [min_x,min_y,max_x,max_y];
-
 	    this.redraw();   // background changed, redraw on screen
 	}
 
@@ -3228,7 +3143,7 @@ schematic = (function() {
 		    this.message(this.operating_point);
 		else {
 		    // make a copy of the operating_point info so we can mess with it
-		    var temp = new Array();
+            var temp = [];
 		    for (var i in this.operating_point) temp[i] = this.operating_point[i];
 
 		    // run through connection points displaying (once) the voltage
@@ -3355,7 +3270,6 @@ schematic = (function() {
 		    // now compute relative position of click within the canvas
 		    this.mouse_x = event.pageX - totalOffsetX;
 		    this.mouse_y = event.pageY - totalOffsetY;
-	
 		    this.page_x = event.pageX;
 		    this.page_y = event.pageY;
 		 }
@@ -3594,12 +3508,10 @@ schematic = (function() {
 		// update moving corner of selection rectangle
 		sch.select_rect[2] = sch.canvas.mouse_x;
 		sch.select_rect[3] = sch.canvas.mouse_y;
-		//sch.message(sch.select_rect.toString());
 	    }
 
 	    // just redraw dynamic components
 	    sch.redraw();
-	    //sch.message(sch.canvas.page_x + ',' + sch.canvas.page_y + ';' + sch.canvas.mouse_x + ',' + sch.canvas.mouse_y + ';' + sch.cursor_x + ',' + sch.cursor_y);
 
 	    return false;
 	}
@@ -3737,7 +3649,6 @@ schematic = (function() {
 	    body.style.padding = '5px';
 	    dialog.appendChild(body);
 
-	    // OK button
 	    var ok_button = document.createElement('span');
 	    ok_button.appendChild(document.createTextNode('OK'));
 	    ok_button.dialog = dialog;   // for the handler to use
@@ -3747,7 +3658,6 @@ schematic = (function() {
 	    ok_button.style.padding = '5px';
 	    ok_button.style.margin = '10px';
 
-	    // cancel button
 	    var cancel_button = document.createElement('span');
 	    cancel_button.appendChild(document.createTextNode('Cancel'));
 	    cancel_button.dialog = dialog;   // for the handler to use
@@ -3770,7 +3680,6 @@ schematic = (function() {
 	    this.window(title,dialog);
 	}
 
-	// callback when user click "Cancel" in a dialog
 	function dialog_cancel(event) {
 	    if (!event) event = window.event;
 	    var dialog = (window.event) ? event.srcElement.dialog : event.target.dialog;
@@ -3778,14 +3687,12 @@ schematic = (function() {
 	    window_close(dialog.win);
 	}
 
-	// callback when user click "OK" in a dialog
 	function dialog_okay(event) {
 	    if (!event) event = window.event;
 	    var dialog = (window.event) ? event.srcElement.dialog : event.target.dialog;
 
 	    window_close(dialog.win);
 
-	    // invoke the callback with the dialog contents as the argument
 	    if (dialog.callback) dialog.callback(dialog.content);
 	}
 
@@ -3824,7 +3731,6 @@ schematic = (function() {
 	    return tbl;
 	}
 
-	// build an input field
 	function build_input(type,size,value) {
 	    var input = document.createElement('input');
 	    input.type = type;
@@ -3890,7 +3796,6 @@ schematic = (function() {
 
 	    // add to DOM
 	    win.style.background = 'white';
-	    //win.style.zIndex = '1000';
 	    win.style.position = 'absolute';
 	    win.style.left = win.left + 'px';
 	    win.style.top = win.top + 'px';
@@ -4076,17 +3981,17 @@ schematic = (function() {
 	    }
 	}
 
-	help_icon = 'data:image/gif;base64,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';
+	var help_icon = 'data:image/gif;base64,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';
 
-	cut_icon = 'data:image/gif;base64,R0lGODlhEAAQALMAAAAAAIAAAACAAICAAAAAgIAAgACAgMDAwICAgP8AAAD/AP//AAAA//8A/wD//////yH5BAEAAAcALAAAAAAQABAAAAQu8MhJqz1g5qs7lxv2gRkQfuWomarXEgDRHjJhf3YtyRav0xcfcFgR0nhB5OwTAQA7';
+	var cut_icon = 'data:image/gif;base64,R0lGODlhEAAQALMAAAAAAIAAAACAAICAAAAAgIAAgACAgMDAwICAgP8AAAD/AP//AAAA//8A/wD//////yH5BAEAAAcALAAAAAAQABAAAAQu8MhJqz1g5qs7lxv2gRkQfuWomarXEgDRHjJhf3YtyRav0xcfcFgR0nhB5OwTAQA7';
 
-	copy_icon = 'data:image/gif;base64,R0lGODlhEAAQALMAAAAAAIAAAACAAICAAAAAgIAAgACAgMDAwICAgP8AAAD/AP//AAAA//8A/wD//////yH5BAEAAAcALAAAAAAQABAAAAQ+8MhJ6wE4Wwqef9gmdV8HiKZJrCz3ecS7TikWfzExvk+M9a0a4MbTkXCgTMeoHPJgG5+yF31SLazsTMTtViIAOw==';
+	var copy_icon = 'data:image/gif;base64,R0lGODlhEAAQALMAAAAAAIAAAACAAICAAAAAgIAAgACAgMDAwICAgP8AAAD/AP//AAAA//8A/wD//////yH5BAEAAAcALAAAAAAQABAAAAQ+8MhJ6wE4Wwqef9gmdV8HiKZJrCz3ecS7TikWfzExvk+M9a0a4MbTkXCgTMeoHPJgG5+yF31SLazsTMTtViIAOw==';
 
-	paste_icon = 'data:image/gif;base64,R0lGODlhEAAQALMAAAAAAIAAAACAAICAAAAAgIAAgACAgMDAwICAgP8AAAD/AP//AAAA//8A/wD//////yH5BAEAAAcALAAAAAAQABAAAARL8MhJqwUYWJnxWp3GDcgAgCdQIqLKXmVLhhnyHiqpr7rME8AgocVDEB5IJHD0SyofBFzxGIQGAbvB0ZkcTq1CKK6z5YorwnR0w44AADs=';
+	var paste_icon = 'data:image/gif;base64,R0lGODlhEAAQALMAAAAAAIAAAACAAICAAAAAgIAAgACAgMDAwICAgP8AAAD/AP//AAAA//8A/wD//////yH5BAEAAAcALAAAAAAQABAAAARL8MhJqwUYWJnxWp3GDcgAgCdQIqLKXmVLhhnyHiqpr7rME8AgocVDEB5IJHD0SyofBFzxGIQGAbvB0ZkcTq1CKK6z5YorwnR0w44AADs=';
 
-	close_icon = 'data:image/gif;base64,R0lGODlhEAAQAMQAAGtra/f3/62tre/v9+bm787O1pycnHNzc6WlpcXFxd7e3tbW1nt7e7W1te/v74SEhMXFzmNjY+bm5v///87OzgAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACH5BAAAAAAALAAAAAAQABAAAAVt4DRMZGmSwRQQBUS9MAwRIyQ5Uq7neEFSDtxOF4T8cobIQaE4RAQ5yjHHiCCSD510QtFGvoCFdppDfBu7bYzy+D7WP5ggAgA8Y3FKwi5IAhIweW1vbBGEWy5rilsFi2tGAwSJixAFBCkpJ5ojIQA7';
+	var close_icon = 'data:image/gif;base64,R0lGODlhEAAQAMQAAGtra/f3/62tre/v9+bm787O1pycnHNzc6WlpcXFxd7e3tbW1nt7e7W1te/v74SEhMXFzmNjY+bm5v///87OzgAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACH5BAAAAAAALAAAAAAQABAAAAVt4DRMZGmSwRQQBUS9MAwRIyQ5Uq7neEFSDtxOF4T8cobIQaE4RAQ5yjHHiCCSD510QtFGvoCFdppDfBu7bYzy+D7WP5ggAgA8Y3FKwi5IAhIweW1vbBGEWy5rilsFi2tGAwSJixAFBCkpJ5ojIQA7';
 
-	grid_icon = 'data:image/gif;base64,R0lGODlhEAAQAMQAAAAAAP///zAwYT09bpGRqZ6et5iYsKWlvbi40MzM5cXF3czM5OHh5tTU2fDw84uMom49DbWKcfLy8g0NDcDAwAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACH5BAEAABQALAAAAAAQABAAAAUtICWOZGmeKDCqIlu68AvMdO2ueHvGuslTN6Bt6MsBd8Zg77hsDW3FpRJFrYpCADs=';
+	var grid_icon = 'data:image/gif;base64,R0lGODlhEAAQAMQAAAAAAP///zAwYT09bpGRqZ6et5iYsKWlvbi40MzM5cXF3czM5OHh5tTU2fDw84uMom49DbWKcfLy8g0NDcDAwAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACH5BAEAABQALAAAAAAQABAAAAUtICWOZGmeKDCqIlu68AvMdO2ueHvGuslTN6Bt6MsBd8Zg77hsDW3FpRJFrYpCADs=';
 
 	///////////////////////////////////////////////////////////////////////////////
 	//
@@ -4108,7 +4013,6 @@ schematic = (function() {
 			    var gt = function (a, b) { return a >= b; };
 			    var capmin = function (a, b) { return Math.min(a, b); };
 			    var capmax = function (a, b) { return Math.max(a, b); };
-		
 			    var checkX = { thereYet: gt, cap: capmin };
 			    var checkY = { thereYet: gt, cap: capmin };
 
@@ -4491,14 +4395,14 @@ schematic = (function() {
 	}
 
 	function array_max(a) {
-	    max = -Infinity;
+        var max = -Infinity;
 	    for (var i = a.length - 1; i >= 0; --i)
 		if (a[i] > max) max = a[i];
 	    return max;
 	}
 
 	function array_min(a) {
-	    min = Infinity;
+        var min = Infinity;
 	    for (var i = a.length - 1; i >= 0; --i)
 		if (a[i] < min) min = a[i];
 	    return min;
@@ -4883,7 +4787,7 @@ schematic = (function() {
 	    this.y = y;
 	    this.rotation = rotation;
 	    this.selected = false;
-	    this.properties = new Array();
+        this.properties = [];
 	    this.bounding_box = [0,0,0,0];   // in device coords [left,top,right,bottom]
 	    this.bbox = this.bounding_box;   // in absolute coords
 	    this.connections = [];
@@ -5025,7 +4929,7 @@ schematic = (function() {
 	    this.sch.draw_arc(c,nx,ny,radius,0,2*Math.PI,false,1,filled);
 	}
 
-	rot_angle = [
+    var rot_angle = [
 		     0.0,		// NORTH (identity)
 		     Math.PI/2,	// EAST (rot270)
 		     Math.PI,	// SOUTH (rot180)
@@ -5056,7 +4960,7 @@ schematic = (function() {
 	}
 
 	// result of rotating an alignment [rot*9 + align]
-	aOrient = [
+    var aOrient = [
 		   0, 1, 2, 3, 4, 5, 6, 7, 8,		// NORTH (identity)
 		   2, 5, 8, 1, 4, 7, 0, 3, 6, 		// EAST (rot270)
 		   8, 7, 6, 5, 4, 3, 2, 1, 0,		// SOUTH (rot180)
@@ -5067,13 +4971,13 @@ schematic = (function() {
 		   0, 3, 6, 1, 4, 7, 2, 5, 8		// RWEST (int-pos)
 		   ];
 
-	textAlign = [
+    var textAlign = [
 		     'left', 'center', 'right',
 		     'left', 'center', 'right',
 		     'left', 'center', 'right'
 		     ];
 
-	textBaseline = [
+    var textBaseline = [
 			'top', 'top', 'top',
 			'middle', 'middle', 'middle',
 			'bottom', 'bottom', 'bottom'
@@ -5129,7 +5033,7 @@ schematic = (function() {
 	Component.prototype.edit_properties = function(x,y) {
 	    if (this.near(x,y)) {
 		// make an <input> widget for each property
-		var fields = new Array();
+        var fields = [];
 		for (var i in this.properties)
 		    // underscore at beginning of property name => system property
 		    if (i.charAt(0) != '_')
@@ -5148,7 +5052,6 @@ schematic = (function() {
 	    } else return false;
 	}
 
-	// clear the labels on all connections
 	Component.prototype.clear_labels = function() {
 	    for (var i = this.connections.length - 1; i >=0; --i) {
 		this.connections[i].clear_label();
@@ -5186,7 +5089,7 @@ schematic = (function() {
 	//
 	////////////////////////////////////////////////////////////////////////////////
 
-	connection_point_radius = 2;
+    var connection_point_radius = 2;
 
 	function ConnectionPoint(parent,x,y) {
 	    this.parent = parent;
@@ -5287,7 +5190,7 @@ schematic = (function() {
 	//
 	////////////////////////////////////////////////////////////////////////////////
 
-	near_distance = 2;   // how close to wire counts as "near by"
+	var near_distance = 2;   // how close to wire counts as "near by"
 
 	function Wire(x1,y1,x2,y2) {
 	    // arbitrarily call x1,y1 the origin
@@ -5493,8 +5396,8 @@ schematic = (function() {
 	//
 	////////////////////////////////////////////////////////////////////////////////
 
-	probe_colors = ['red','green','blue','cyan','magenta','yellow','black','x-axis'];
-	probe_colors_rgb = {
+    var probe_colors = ['red','green','blue','cyan','magenta','yellow','black','x-axis'];
+    var probe_colors_rgb = {
 	    'red': 'rgb(255,64,64)',
 	    'green': 'rgb(64,255,64)',
 	    'blue': 'rgb(64,64,255)',
@@ -5551,7 +5454,7 @@ schematic = (function() {
 
 	Probe.prototype.edit_properties = function(x,y) {
 	    if (inside(this.bbox,x,y)) {
-		var fields = new Array();
+        var fields = [];
 		fields['Plot color'] = build_select(probe_colors,this.properties['color']);
 		fields['Plot offset'] = build_input('text',10,this.properties['offset']);
 
@@ -5798,7 +5701,7 @@ schematic = (function() {
 	//
 	////////////////////////////////////////////////////////////////////////////////
 
-	diode_types = ['normal','ideal'];
+	var diode_types = ['normal','ideal'];
 
 	function Diode(x,y,rotation,name,area,type) {
 	    Component.call(this,'d',x,y,rotation);
@@ -5846,7 +5749,7 @@ schematic = (function() {
 
 	Diode.prototype.edit_properties = function(x,y) {
 	    if (inside(this.bbox,x,y)) {
-		var fields = new Array();
+            var fields = [];
 		fields['name'] = build_input('text',10,this.properties['name']);
 		fields['area'] = build_input('text',10,this.properties['area']);
 		fields['type'] = build_select(diode_types,this.properties['type']);
@@ -5895,7 +5798,6 @@ schematic = (function() {
 	    this.draw_line(c,-8,16,-8,32);
 	    this.draw_line(c,-8,32,0,32);
 	    this.draw_line(c,0,32,0,48);
-
 	    this.draw_line(c,-24,24,-12,24);
 	    this.draw_line(c,-12,16,-12,32);
 
@@ -5941,9 +5843,7 @@ schematic = (function() {
 	    this.draw_line(c,-8,16,-8,32);
 	    this.draw_line(c,-8,32,0,32);
 	    this.draw_line(c,0,32,0,48);
-
 	    this.draw_line(c,-24,24,-16,24);
-
 	    this.draw_circle(c,-14,24,2,false);
 	    this.draw_line(c,-12,16,-12,32);
 
@@ -6014,7 +5914,6 @@ schematic = (function() {
 	//
 	////////////////////////////////////////////////////////////////////////////////
 
-	
 	function Source(x,y,rotation,name,type,value) {
 	    Component.call(this,type,x,y,rotation);
 	    this.properties['name'] = name;
@@ -6024,7 +5923,6 @@ schematic = (function() {
 	    this.add_connection(0,48);
 	    this.bounding_box = [-12,0,12,48];
 	    this.update_coords();
-
 	    this.content = document.createElement('div');  // used by edit_properties
 	}
 	Source.prototype = new Component();
@@ -6041,15 +5939,10 @@ schematic = (function() {
 	    this.draw_line(c,0,36,0,48);
 
 	    if (this.type == 'v') {  // voltage source
-		//this.draw_text(c,'+',0,12,1,property_size);
-		//this.draw_text(c,'\u2013',0,36,7,property_size);  // minus sign
 		// draw + and -
 		this.draw_line(c,0,15,0,21);
 		this.draw_line(c,-3,18,3,18);
 		this.draw_line(c,-3,30,3,30);
-		// draw V
-		//this.draw_line(c,-3,20,0,28);
-		//this.draw_line(c,3,20,0,28);
 	    } else if (this.type == 'i') {  // current source
 		// draw arrow: pos to neg
 		this.draw_line(c,0,15,0,32);
@@ -6064,7 +5957,7 @@ schematic = (function() {
 	}
 
 	// map source function name to labels for each source parameter
-	source_functions = {
+	var source_functions = {
 	    'dc': ['DC value'],
 
 	    'impulse': ['Height',
@@ -6201,7 +6094,6 @@ schematic = (function() {
 	    } else return false;
 	}
 
-
 	function VSource(x,y,rotation,name,value) {
 	    Source.call(this,x,y,rotation,name,'v',value);
 	    this.type = 'v';
@@ -6304,3 +6196,4 @@ schematic = (function() {
 	}
 	return module;
     }());
+